这是本文档旧的修订版!
合法的ADF用户,应根据SCM公司与用户之间签订的许可协议(用户在购买过程中,已签署该协议),正确地进行引用:
按照SCM官方要求,应根据所使用模块引用对应的内容,具体入下:
ADF模块:应引用如下文献,并说明软件的版本号:
BAND模块:应引用如下文献,并说明软件的版本号:
ReaxFF模块:应引用如下文献,并说明软件的版本号:
其他模块,详见各个模块手册对引用文献的要求。
COSMO-RS模块
如果使用了COSMO-SAC 2013还需要引用:
除一般性引用之外,如果使用了软件的特征功能,则应将这些特征功能进行引用,详见手册(例如ADF2016.101/Doc/html/ADF/index.html)中各个模块对引用文献的要求。
ADF模块
例如对基组,应该引用如下文献:
ReaxFF模块 Force-bias Monte Carlo (fbMC)功能应引用
Grand Canonical Monte Carlo (GCMC)
Monte-Carlo force-field optimizer (MCFFOptimizer)功能应引用
每个力场也应引用该力场对应的文献。力场文件(例如ADF2016.101\atomicdata\ForceFields\ReaxFF\CHONSSiGe.ff)可以用写字板打开,第一行即为发布该力场的文献。